Marshall electronic - MD-0114-EQ

Below are all the different types of Marshall electronic. Select the device of your choice, to download the manual

Contents

Marshall To operate unit insert the power plug Marshall V PS6 1 2A into the power jack located on the rear of the unit and twist the sleeve to lock the connector on The unit is automatically turned on when power is supplied to the unit and indicated by the power LED on the front of the unit Supply a NTSC PAL composite video signal to the video BNC con nector labeled VIDEO IN When using longer cables it may be necessary to adjust the picture by using the GAIN and HF EQ knobs on the front of the unit Gain parameters are as follows 1 GAIN The GAIN knob has a 6dB range where OdB gain is indicated by the knob pointing to the 12 o clock position 2 HF EQ The HF EQ knob has a 5dB range at the 3 58MHz frequency where OdB gain is indicated by the knob ...